Menu

AWLGRIP 545 EPOXY PRIMER CONVERTER


$40.99


SKU: AD3001Q
Manufacturer: Awlgrip
Weight: 2.30 lbs
UNIT: EACH
Video:

Size:
Quantity

Share AWLGRIP 545 EPOXY PRIMER CONVERTER


Share

AwlGrip D3001 Converter for Awlgrip 545, a two component epoxy primer with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Also used to seal filler primers, and fairing work before applying topcoats. May be applied by spray, brush, or roller. May be used above or below the waterline. Coverage: 298 Sq. Feet at one mil dry, 198-496 Sq. Feet at recommended dry film thickness. Coverage calculated for mixed base and converter, reduced 50%. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application en Recommended Wet Film Thickness: 7-10 mils (175-250 microns) Recommended Dry Film Thickness: 2-3 mils (50-75 microns) Recoatability: At 77F/50% R.H. minimum 2-4 hours. Maximum without sanding is 24 hours. Plan your work schedule to eliminate having to sand 30-Y-94TM. May be overcoated with AWLGRIP®/AWLCRAFT® 2000 Topcoats, 545 Epoxy Primer, High Build Epoxy Primer, AWL-QUIK® Sanding Surfacer, and ULTRA-BUILD® Epoxy Primer. VOC: White Base 435 g/lt or 3.6 lbs/gal. Gray Base 426 g/lt or 3.6 lbs/gal. Converter 616 g/lt or 5.1 lbs/gal. Type: Epoxy Polyamide Packaging: 1 Gallon or 1 Quart containers


There have been no reviews

Only registered customers are allowed to add review. Please sign in and add your own review!