Not rated yet
Gelcoat Patchaid
Gelcoat Patchaid
- Shipping infoWe deliver worldwide
- Payment methods
- Return PolicyWe accept returns
Patch Aid is designed to improve the working properties of traditional gel coat spray patches. This is achieved by thinning the gel coat, minimizing orange peel, speeding the cure, and reducing surface tackiness.
Patch Aid mixed with gel coat will provide these properties:
Low color, which results in excellent spray patches
Low viscosity, for easier spray and less orange peel
Longer working time, advantageous for repairing large defects and for mold resurfacing.
Light stabilized, to minimize discoloration of patches made using clear and pigmented gel coats.
Good surface cure, which minimizes sandpaper "gumming".
Excellent sanding and buffing.
Easy mold resurfacing.
Patch Aid also eliminates the need to thin, side-promote or add wax to gelcoats prior to patching.
Application guidelines
1. Mix patch aid thoroughly.
2. The recommended ratio mix 25%-33% Patch Aid to gel coat. To this mix, add correct amount of MekP Hardener/Catalyst. Mix and spray.
3. The acceptable method for measuring small quantities of MEKP is with a syringe. Even a thinly sprayed layer will be ready to sand in approximately one hour and hard enough to buff soon thereafter.
4. Care must be taken not to over-or under-catalyze, which may affect color.
5. Working time is approximately five minutes.
Precautions: Always shake or mix before using. This assures a uniform mixture that will perform the same, from the first patch to the last. If Patch Aid has been allowed to become cooler than 70 F, it could become cloudy and, at this point, would no longer be a homogeneous solution. The material should be brought to room temperature and returned to its original appearance before using. Catalyzed masses get very hot as they cure. Excess catalyzed patching materials should be placed in a bucket of water to cool.
To replace this text with your store's actual shipping info, go to "Catalog -> Product tabs" and edit the Shipping info page.
We accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.